Dryer Cord Installation Guide

Dryer Cord Installation Guide

These pages will walk you through the steps in setting up and replacing a dryer cord. There are 2 forms of cords: three cable cords and four cable cords. One most regularly asked concern we have about dryers is “where could I find an adapter so my cable will connect in to the receptacle?” My answer is always they cannot make an adapter for dryer cords. Another typical concern we get it come with a cord?” is” I just purchased a dryer, why didn’t My response is some homely homes have actually three cable receptacles plus some have four wire receptacles therefore dryers do not have cable.

Never ever make an effort to replace the receptacle within your house to fit your cable always replace the cable.

Determine the kind of dryer cable you will need

The step that is first setting up a dryer cable is always to recognize the kind of cable you will need. Check your dryer receptacle in your wall surface. Some homes have actually four-wire receptacles plus some have three cable receptacles. This simply varies according to if the wiring was done and just what the rule is at enough time. Never try to replace the receptacle, always install the proper cable that corresponds into the sort of receptacle your property has. Below is a photo that may help you figure out the sort of receptacle you have.

Keep in mind that the receptacle shall have screw gap in the middle of the receptacle. Don’t error this screw opening for an additional cable.

Install Three-Wire Cord

This element of this site will describe how exactly to install a three wire cord. If the household features a three-wire receptacle you have to install a three cable cable. Most three wire cords have actually three wires that are gray line with one another. The dyer will have terminal block with three articles, which correspond every single of this cord cables. The post within the center is the wire that is neutral that will be also utilized being a ground generally there should always be a cable or perhaps a band connecting the guts post to ground. Dryers have a band or cable connecting the middle post to ground however if there clearly was formerly a cord that is http://www.hookupwebsites.org/black-singles-review/ four-wire the dryer it could be lacking. If you have perhaps not just a wire or strap linking the guts post to ground you need to locate a cable to take action. This wire should be at the very least as huge as the wires in the cord. This will be significant because if this ground band just isn’t provide the dryer will never be grounded and that can cause electric surprise simply by pressing the dryer. Link the middle cable regarding the cable towards the center post regarding the dryer terminal block. Link the 2 outside cables to your two outside post on the dryer terminal block. The dryer cord includes a clamp, set it up as well as your cable is set up. The diagram below should assist.

Install Four-Wire Cord

Like or Share Us: